Filter
Top Products
(Ending User ID
Number 10)
(ADD)
(ENTER)
(Starting
User No. 1)
(THRU)
(THRU)
Secura Key 25
(VOID)
(ENTER)
(User ID Number 12)
Radio Key
®
RK-65K Operating Guide
starting User ID Number to the unit. Press THRU. Then press the
sequence of digits representing the desired ending User ID Number.
Press THRU, then press ENTER. Present the Transponders to
the reader in the desired order (making a careful record of which
transponders are assigned to which User ID Numbers). If one or
more Transponders are already entered into the User ID Number
range you have selected, they will be overwritten. For example,
to program ten transponders into User ID Numbers 1 through 10,
the following sequence would be presented;
+ 1 + + 1 + 0 + +
then present the ten transponders to the unit one at a time.
Delete a Transponder from the System:
Put the unit into the Program mode (See Page 8). Press VOID,
then press the sequence of digits representing the desired User
ID Number (1 - 100). Then press ENTER. A green light and
beep means that the Transponder was deleted. For example,
to delete the transponder for User ID Numbers 12, the following
sequence would be executed;
+ 1 + 2 +