Filter
Top Products
(SET TIMER)
(ENTER)
(15 Seconds)
Radio Key
®
RK-65K Operating Guide
Secura Key 12
(Ending User ID
Number 10)
(ENTER)
(VOID)
(THRU)
(Starting
User No. 1)
Delete A Series Of Transponders From The System (RK65K):
Place the unit in the Program Mode (see Page 8). Press Void,
followed by the sequence of digits representing the lowest
transponder ID. Then press Thru followed by the sequence of
digits representing the highest number transponder. Finally, press
Enter. For example, to delete transponders #1 through #10:
+ 1 + + 1 + 0 +
Transponders #1 through #10 are now void.
Set the Latch Timer (RK65K/RK100M):
Put the unit into the Program mode, (See Page 8). Press SET
TIMER, then press the sequence of digits representing the desired
Latch Time (0 - 65535 seconds) to the unit. Press ENTER. A
green light and beep means that the Latch Timer setting was
changed. (If you set the Latch Timer for “0” seconds, the actual
latch time will be approximately 0.25 seconds.) For example,
to set the latch timer to 15 seconds, the following sequence
would be followed;
+ 1 + 5 +