Filter
Top Products
21(E)
Setting the Operating Conditions
of the RM-B750
By using the RM Configuration menu or LCD setting
display, you can set the built-in clock of the RM-B750
and adjust various conditions of the RM-B750, such as
the sound volume of the warning buzzer and the
brightness of the indicators and LCD.
To display the RM Configuration menu/
LCD setting display
Proceed as follows:
1 Press to light the MAINTENANCE button of the
menu operation block.
The Maintenance Menu appears.
2 To display RM Configuration menu, press
[RM Config].
The RM Configuration menu appears.
RM
Adjusting
Date
Time
Infor-
mation
Secu-
rity
Cable
Comp
SW
Setting
VR
Setting
RM Config Menu
Exit
To obtain the LCD setting display, press [LCD].
The LCD setting display
(page 23(E)) appears.
Setting the Built-in Clock
The RM-B750 has a built-in clock to record the date
and time when reference and scene files are saved to
Memory Sticks.
To set the clock, proceed as follows:
1 Press [Date/Time] on the RM Configuration menu.
The current setting is displayed on the Date/Time
Set menu.
Exit
Date Time
2001/11/17
(Sat)
22
:
12
:
31
Date Time Set Menu
2 To set the date:
1)Press and light
[Date].
Year
2001
Month
8
Day
Date Time
Exit
Set Cancel
8
2001/11/17
(Sat)
22
:
12
:
31
Date Time Setting
2)Set the Year, Month and Day with the left three
control knobs.
3)Press
[Set].
The set date becomes valid.
To restore the previous setting, press
[Cancel]
instead of [Set].
Initial Settings
MONITOR
FUNCTION
VF DISP
MENU SELECT
MAINTENANCE
VF MENU
SCENE
CANCEL
PAINT
ENTER
Auto
Setup
Camera
Config
RM
Config
LCD
Memory
Stick
Super
Motion
Adjusting File
Maintenance Menu
1
2
Unlit when setting the
menus of this unit.