Filter
Top Products
7(E)
qs Iris/master black control block
A AUTO IRIS button
Press and light the button to automatically adjust the
iris according to the amount of input light.
If you press the button when lit, it goes dark, and
manual iris adjustment is enabled.
B EXT (lens extender) indicator
Lights when the lens extender is used on the connected
camera.
C IRIS control
When the AUTO IRIS button is not lit, you can adjust
the iris manually by turning the control.
When the AUTO IRIS button is lit, you can fine-adjust
the reference value for automatic iris adjustment in a
range of ±2f with this control.
The adjustment mode of this control is specified at the
factory as Absolute mode, which can also be changed
to Relative mode using the RM Configuration menu
under the Maintenance menu
(see page 19(E)).
D IRIS/MB ACTIVE (iris/master black active)
indicator
Lights when the control mode is set as FULL or PART
mode with the PANEL ACTIVE button. When this
indicator is lit, iris/master black controls from this unit
are enabled.
E MASTER BLACK control
Manually adjusts the master black level.
The adjustment mode of this control is specified at the
factory as Relative mode, which can be changed to
Absolute mode using the RM Configuration menu
under the Maintenance menu
(see page 19(E)).
qd White balance/black balance control block
A AWB (auto white balance) button
Press to automatically adjust the white balance.
The button lights during adjustment and goes dark
when adjustment is completed.
If you press this button when lit, the automatic
adjustment is canceled, and the button flashes. To stop
the flashing, press the button again.
B ABB (auto black balance) button
Press to automatically adjust the black balance and
black set.
The button lights during adjustment and goes dark
when adjustment is completed.
If you press this button when lit, the automatic
adjustment is canceled, and the button flashes. To stop
the flashing, press the button again.
Note
When the adjustment mode of the BLACK controls is
specified as Absolute mode, automatic black balance
adjustment with ABB button is disabled.
C WHITE (white balance) controls
Adjust the R/B white balance.
The adjustment mode of these controls is specified at
the factory as Relative mode, which can be changed to
Absolute mode using the RM Configuration menu
under the Maintenance menu
(see page 19(E)).
D BLACK (black balance) controls
Adjust the R/B black balance.
The adjustment mode of these controls is specified at
the factory as Relative mode, which can be changed to
Absolute mode using the RM Configuration menu
under the Maintenance menu
(see page 19(E)).
AUTO
IRIS
IRIS/MB
ACTIVE
MASTER
BLACK
EXT
IRIS
EMASTER BLACK
control
DIRIS/MB ACTIVE
indicator
A AUTO IRIS
button
B EXT indicator
C IRIS control
AWB
WHITE
BLACK
ABB
D BLACK controls
A AWB button
B ABB button
C WHITE controls