Filter
Top Products
4(E)
Operation Panel
1 Memory Stick slot
Insert a Memory Stick to store setting data, such as
reference files and scene files of the video camera or
camera control unit.
2 MEMORY STICK (Memory Stick access)
lamp
The lamp shows the status of the Memory Stick.
Off: No Memory Stick is inserted.
Lit in green: There is a Memory Stick in the slot.
In this condition, you can safely eject the Memory
Stick.
Lit in red: Data are being read/written. If you eject
the Memory Stick in this condition, the data are
not guaranteed. All the data may be lost.
For details on Memory Sticks, see page 24(E).
Locations and Functions of Parts
3 PANEL ACTIVE button
Press to select the control mode for the connected
camera system. Each time you press the button with
the factory setting, the control mode cyclically
switches among FULL, PART, and LOCK modes.
FULL mode: All controls from this unit are enabled
(panel active status). Both this button and the
IRIS/MB ACTIVE indicator in the iris/master
black control block light.
PART mode: Controls only from the iris/master black
control block are enabled (iris/master black active
status). This button goes dark, but the IRIS/MB
ACTIVE indicator stays lit.
LOCK mode: All controls from this unit are disabled
(lock status). Both this button and the IRIS/MB
ACTIVE indicator in the iris/master black control
block go dark.
MONITOR
FUNCTION
VF DISP
MENU SELECT
MAINTENANCE
VF MENU
SCENE
CANCEL
PA IN T
ENTER
ALARM
PA NE L
ACTIVE
MEMORY
STICK
STANDARD TEST BARS CLOSE
AWB
AUTO
IRIS
IRIS/MB
ACTIVE
MASTER
BLACK
REMOTE CONTROL UNIT RM-B750
EXT
IRIS
WHITE
BLACK
ABB
VTR
START/STOP
qdWhite balance/black
balance control block
6Test signal output select buttons
8VTR START/STOP button
9 VTR playback control
buttons
0ALARM indicator
qaMenu operation block
qsIris/master black control block
1Memory Stick slot
2MEMORY STICK lamp
3PANEL ACTIVE button
4 STANDARD button
5 Spare button
7CLOSE button
Rubber cap