Filter
Top Products
6(E)
qa Menu operation block
A RM menu select/camera menu set buttons
MONITOR: When this button is unlit, you can
select the menus of this unit using the other
buttons (RM Menu mode in which the functions
indicated with white letters for the buttons are
valid).
Press and light this button to display the video
signal (SDTV signal only) from the connected
camera on the LCD. This also permits the menus
of the camera to be operated from this unit (the
functions indicated with blue letters for the
buttons and the leftmost control knob are valid).
FUNCTION/VF DISP (viewfinder display): With
the MONITOR button unlit, the Function menu of
this unit appears on the LCD when you press and
light this button.
With the MONITOR button lit, the character
display of the camera is turned on when you press
and light this button.
MAINTENANCE/VF MENU (viewfinder menu):
With the MONITOR button unlit, the
Maintenance menu of this unit appears on the
LCD when you press and light this button.
With the MONITOR button lit, the unit enters
Camera Menu mode when you press and light this
button. The main menu of the camera appears on
the LCD.
SCENE/CANCEL: With the MONITOR button
unlit, the Scene File menu of this unit appears on
the LCD when you press and light this button.
With the MONITOR button lit, you can cancel the
setting of the camera menu item selected on the
LCD by pressing this button.
PAINT/ENTER: With the MONITOR button unlit,
the Paint menu of this unit appears on the LCD
when you press and light this button.
With the MONITOR button lit, you can register
the setting of the camera menu item selected on
the LCD by pressing this button.
When none of the buttons are lit, the status display
(page 10(E)) is obtained.
For the items of each menu, see “Menu Items” on page 14(E).
For details on the camera menus, refer to the Operation
Manual or the System Manual for the camera.
B LCD/touch panel
Normally displays the statuses (see page 10(E)).
When you press and light the MONITOR button, it
displays the video signal from the connected camera
(SDTV signal only. HDTV signal will not be
displayed.).
In RM Menu or Camera Menu mode, the selected
menu is displayed to permit you to operate the menu.
C Control knobs (rotary encoders)
In RM Menu mode, adjust the selected items on the
touch panel.
In Camera Menu mode, select and adjust the menu
items using the leftmost knob.
Locations and Functions of Parts
MONITOR
FUNCTION
VF DISP
MENU SELECT
MAINTENANCE
VF MENU
SCENE
CANCEL
PAINT
ENTER
CControl knobs
ARM menu select/camera
menu set buttons
BLCD/touch panel