Filter
Top Products
82
7
5
3
8
6
4
2
1
Reverse stitch button
Interrupteur couture arrière
Interruptor de puntadas
hacia atrás
Embroidered section
Section brodée
Sección bordada
Blank stitches resulting from thread breakage
Points vides résultant d’une rupture du l
Puntadas en blanco resultantes de ruptura de hilo
Embroidering direction
Direction de broderie
Dirección de bordado
automatically stop
S’arrête automatiquement
Para automáticamente
1. If stitches are missing
If the embroidery machine detects that the thread has
broken, it may continue to embroider up to about eight
stitches without any thread (blank stitches) before it
automatically stops.
In such cases, use the following procedure to step back
through the embroidering data to the point for continuing.
1. Press the reverse switch (stitch return) to step back
through the embroidery data. The hoop will move
back one stitch at a time. Step back through the data
until the blank area has been completely passed
over.
2. Restart the embroidery machine and continue
embroidering.
HELPFUL INFORMATION FOR
EMBROIDERING WITH FUTURA
2. Computer screen says thread is broken,
machine lights are flashing lights and
making a beeping sound, but thread is
not broken.
Upper thread is not in the thread tension. Rethread
upper thread, (see page 16 - 17 “Threading the Top
Thread”.) Placing the small net that is supplied with the
accessories over the spool of thread may ensure that the
thread is unwinding properly.