Singer XL-400 Sewing Machine User Manual


 
72
INSTALLATION OF SOFTWARE
In order to start using the software on your PC you would
have to first install the contents of the CD to your PC.
This procedure is refered to as “installation procedure”.
Please follow the below listed instructions in order to
successfully install FUTURA on your personal computer.
The FUTURA software comes on a CD-ROM disc.
In most personal computers the default drive setting for a
CD-ROM drive is “D:”
Please insert the FUTURA CD-ROM into the CD-ROM disc
receiver in your PC.
After some seconds, the Installation procedure of the software
will start automatically.
If after a short while, the software doesn’t automatically
start the installation process, you may start the installation
procedure manually by going to the “Start” option of Windows,
select “Run”, type “D:\FuturaStart.exe” and click on OK.
After some seconds the step-by-step installation of the
software begins with the Welcome window.
Click on “Next” to move on to the next screen.
After reading and agreeing with terms given in the
License Agreement, please click on “Yes”, and again click
on Next, and then select the directory where the software
should be installed. It is highly recommended to use the
selected default directory.
Simply click on “Next” to continue.
CD-ROM