Filter
Top Products
92
ii iii ivi
ii iii iviv
ii
i
c
a. Mirror / Reverse stitch
If this button appears, you can change the
mirror stitch, or reverse stitch or mirror/reverse
stitch. Touching this button, stitch will fl ip from
left to right or from bottom to top. The icon
on the button indicates the selected stitch as
follows.
i. Regular stitch (normal stitch)
ii. Mirror stitch (fl ips from left to right)
iii. Reverse stitch (reverse bottom to top)
iv. Mirror and Reverse stitch.
The pattern on the left side of LCD will
change accrording to this setting.
If button is not indicated, its pattern cannot
change (mirror/reverse stitch).
b. Elongation
If this button appears, you can elongate the
pattern. By touching this button, stitch will
elongate fi ve different sizes. (i-v) If elongation
setting is over x2, the pattern on the left side of
LCD will indicate the number of elongation.
If button is not indicated, its pattern cannot
elongate.
c. Setting the stitch width and length
Machine will pre-set the stitch width and length
suitable for the pattern.
You can make changes by touching the each [+]
or [-] button.
i. For narrower width, touch the width [-]
button.
For wider width, touch the width [+] button.
ii. For shorter length, touch the length [-]
button.
For longer length, touch the length [+]
button.
Pre-set stitch width and length will be indicated
as a highlighted number.
You can change the width and length of other
patterns by shifting the position of the cursor.
If the width, length or number icons are not
indicated, the pattern cannot be changed.
By touching the return button, machine will
return to selecting mode.
i
ii