Filter
Top Products
40
4
5
6
7
3
2
1
Maintenance
Attention:
Remove the needle plate:
Cleaning the feed dog:
Cleaning and lubricating the hook:
Important:
Disconnect the machine from the electricity supply by removing the plug
from the mains socket. When cleaning the machine, it must always be
disconnected from the electricity supply.
Turn the handwheel until the needle is fully raised.
Open the hinged front cover and unscrew the needle plate screw withe the
screw driver. (1)
Remove the bobbin case and use the brush supplied to clean the whole area. (2)
Remove the bobbin case. Snap the two hook retaining arms (3) outwards.
Remove the hook race cover (4) and the hook (5) and clean withe a soft
cloth. Lubricate at the points (6) (1-2 drops) with sewing machine oil.
Turn the handwheel until the hook race (7) is in the left position. Replace the
hook (5). Replace the hook race cover and snap back the two hook retaining
arms. Insert he bobbin case and bobbin and replace the stitch plate.
Fabric fluff and threads must be removed regularly. Your machine should be
serviced at regular intervals.