Filter
Top Products
9
4830 & 4832
Choosing and changing needles
• Raise needle to its highest position.
• Loosen needle clamp screw and remove
needle.
• With flat side of needle to the back, insert
new needle up into clamp as far as it will
go.
• Tighten needle clamp screw securely.
Changing the needle plate (A), (C)
• Raise needle and presses foot.
• Open slide plate.
• Lift up needle plate from right comer and
slide out from under foot.
• To replace needle plate slide it under pin
(1) and push it firmly to the left.
• Press down until it snaps into place
Changing screw-on presser feet (H)
• Raise needle and presser foot.
• Loosen presser foot screw (1) and remove
presser foot with shank (2), guiding it
toward you and to the right.
• To replace presser foot with shank, hook
shank around the presser bar and tighten
presser foot screw with the use of a coin.