Filter
Top Products
21
4830 & 4832
Inserting a zipper
Preparation
Pattern:
Needle position:
Stitch width:
Stitch length: 2-5
Foot: Zipper (E)
Needle plate: General Purpose (A)
Adjusting the zipper foot
When the zipper teeth are to the left of the
needle (A):
• Slide the adjusting block, (1) which slides
on the pin, across to the right.
• Snap-on the foot to the left side of the pin.
When the zipper teeth are to the right of the
needle (B):
• Slide the adjusting block (1) across to the
left.
• Snap on the foot to the right side of the pin.