Filter
Top Products
19
4830 & 4832
Straight stitching
Stitch width selector
Before you move the selectors to set your
machine for straight stitching, turn the hand
wheel toward you until needle is at its highest
point.
Straight stitching can be performed with pat-
tern selector in any position; stitch width lever
must be set at ( ) only.
Needle position selector
Needle Position Selector positions the needle
in left ( ), center ( ) or right ( ) needle
positions.
Stitch length selector
To adjust the length of your stitches, turn the
dial so that desired stitch length is positioned
under (•) symbol.
• To shorten ditch length, turn dial toward a
lower number.
• To lengthen stitch length, turn dial toward a
higher number.