Sears 385. 1884180 Sewing Machine User Manual


 
Plug in the Machine and Switch on the Power
Power supply plug
Power
/ supply
NOTE:
Plug
connector
Machine
plug
Before inserting the plug into your
machine, be sure the power switch is
OFF
t. Check your outlet to be sure it is a 110to 120
Volt AC outlet,
2. Insert the machine plug into the three-prong
outlet, as shown, tt will only fit one way.
3. Insert the power supply plug into the outlet.
4.
Sewing ligh_ _
Power sw_Ich
.J
Push the light and power switch to turn
on the power and sewing light,
SAFETY FEATURE:
Your machine witl not operate unless the
llght/power switch _s turned on, If you are
interrupted or stop sewing, turn off the
light/power switch to prevent mllury to
children.
Foot Control Use
J
The toot control regulates the speed at
which you sew.
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres-
sure slightly.
NOTE:
The foot control is sensitive and
will increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.