Filter
Top Products
To Snap On
G
To Snap On the Presser Foot;
1. Place the presser foot so the hori-
zontal pin on the foot lies just
under the groove of the foot
holder.
2. Lower the presser foot holder to
lock the presser foot in place.
NOTE:
If you do not hear the
presser foot snap in place,
press down on the presser
foot holder firmly until you
hear the snap.
• PresserFoot Types
Zigzag Foot
f
%
A: Zigzag foot
Use this foot for both straight and zigzag
stitching_
Uses: Zigzag stitching {see page 35),
Bar tackir_g (see page 37),
Button sewing (see page 39),
Rick-rack stretch (see page 40_1,
Three-step zigzag (see page 41},
Overcast stretch (see page 42),
Lace work (see page 44),
Two-point shell stitching
(see page 54),
Smocking (see page 55),
Stretch patching {see page 555),
Fagoting (see page 56),
Herring bone stretch tsee page 56),
Elastic stretch (see page 5_7),
Box stitching (see page 57),
Two-point box stitching (see page 58),
Overedging stitch (see page 58),
Decorative stretch stitching
(see page 59).
Straight Feot
H: Straight foot
Use this foot exclusively for straight stitching
using center needle position only,
Uses: Straight stitching lsee page 31),
Topstitching {see page 32),
Straight stretch (seepage 34),
Quilting (see page 33),
1t