Filter
Top Products
iii
Monogramming
Set the Machine
Top thread tension
control 2 to 6
F_ Satin stitch
foot
Stitch width
control 5 to 6
2
I
Stitch length
control 0.5 to
0_;_ Herc:'s How
1,
4
2.
Stretch Stitch 3.
38
Set the same as satin stitch.
Back the fabric with paper or
{nterfacing.
Draw the letters-on the fabric
with tailor's chalk.
4, Satin stitch, adjusting the stitch
width as necessary to form each
pattern.
5, If using paper, carefully remove it
when you have finished sewing.
= Embroidery
Set the Machine
Stitch width
a 6
Fop thread tension Stitch length control
control 2 to 6 Any number Inot
necessary to adjust)
No presser
foot Stretch Stitch
Here's How
1.
2.
3,
4.
5.
6.
7.
8.
Put the darning plate on the needle
plate (see page 3_22).
Remove foot holder {see page 10),
Adjust the stitch width as desired
(see page 23).
Draw the design on to the fabric
with tailor's chalk.
Stretch the fabric between embrm-
dory hoops-and place under the
needle.
Lower the presser foot lever to
engage the top thread tension.
Holding the top thread in your left
hand, rotate the hand wheel toward
you one complete turn.
Pull the top thread to draw the
bobbin thread through to the surface
of the fabric.
Using a medium speed, stitch along
the marked outline, guiding the
fabric carefully by hand.