Filter
Top Products
Set the Machine
Stitch w_dth
r _ "_ control 3 to 6
Stitch length
_31 controt
Blue zone F==_
top thread tension
controt 2 to 6
__ Stretch Stitch
Stiding buttonhole foot
Ad usting the Stitch Density
Depending upon your fabric or your
own preference in buttonholes, you
may alter the buttonhole stitch
density withm the blue buttonhole
range on the stitch length dial.
t. For less density, turn the diat
toward ""1"
2. For more dens=ty, turn the dial
toward "0",
NOTE; Always make a practsce but-
tonhole on a scrap tabric you
plan to use to find the more
suitable stitch length.
46
1, a. Carefully mark the buttonhole
length on your garment.
b, Change to the sliding buttonhole
foot,
c. _nser_ the garment under the
foot with the buttonhole mark-
ing runnmg toward you.
2. a. Move the slider (A) toward you
so that the top mark (C) on the
slider meets the start mark {B).
b. Lme up the markings on the
foot with the top mark on your
garment,
c. Lower the presser loot.
NOTE. The markings on the slider
are engraved in centimeters.
_._s
Slrelch Stitch
3, a, Set the stttch selector at _ ,
b. Sew forward undl you reach the
front markmg of your button-
holm
c. Stop sewmg at the left stitch,