Sears 385. 17526 Sewing Machine User Manual


 
SECTION 2. PREPARE THE MAHCINE FOR SEWING
Set Up the Machine
o Plug in the Machine and Switch on the Power
Foot Control Use
Power suppiy pIug
Power sw_tch
Plug connecter
\
Machine plug
J
NOTE: Before inserting the plug into your
machine, be sure the power switch is OFF_
1.
2.
3.
Check your outlet to be sure itis a 110 to t 20 Volt
AC outlet.
Insert the machine plug into the three-prong
outlet, as shown. It will only fit one way.
Insert the power supply plug into the outlet.
4.
Sewing light
........................ power switch j
Push the power switch to turn on the power
and sewing light.
SAFETY FEATURE:
Your machine wilt not operate unless the
power switch is turned on. If you are interrupted
or stop sewing, turn off the power switch to
prevent injury to children.
E-- -...... ,- < ]
/
Foot control
The foot control regulates the speed at which
you sew.
To increase speed, gently press down with
the ball of your toot.
To decrease speed, release your loot pres-
sure slightly.
NOTE: The foot control is sensitive and wilt
increase or decrease your sewing
speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to your
taste and needs.