Filter
Top Products
KnowWhatthe Presser Feet Will Do
= Check The Presser Foot
The Presser leer are an important feature this machine. You need to know
what each does in order to use them effectively.
Your presser foot is held in place by a Foot Holder. Each presser foot merely
snaps on the toot is holder, which is seldom removed.
If you need to remove or attach the toot holder, here is what you do:
SECTION 2. PREPARE THE MACHINE FOR SEWING
• Change the Presser Foot
Use the correct presser loot tor the stitch you wish to sew. Consult the Stitch
Pattern Chat and the detailed direction tor sewing with the various presser
toot.
To Remove:
,1-
Foot
To Remove:
Turn the screw toward the back of
the machine. Use the large screw
driver.
To Attach:
f
Presser I:
J
To Attach:
1. Match the hole in the toot holder
with the thread hole in the
presser bar.
2. Fitthe toot holder screw into the
hole.
3. Tighten the screw by turning it
toward you.
To Snap Off:
! y,,
J
Snap-on
button
To Snap Off the Presser Foot::
t. Raise the needle bar to its highest position by turning the hand wheei
toward you.
2. Raise the presser loot.
3. Press the snap-on button on the back of the toot holder. The presser toot
will drop off.
11