Filter
Top Products
Clean the Hook Race and Feed Dogs
21
3.
Unplug the machine and remove
the presser foot and needle.
Remove the bobbin cover plate.
Remove the screw on the left side
ol the needle with the large screw
driver.
.....,J
5. Take out the bobbin. Lift up the
bobbin holder and remove it.
4. Remove the needle plate.
f ......
k._ j
6. Use the ling brush to clean the teed 7. Line up the triangle,
dogs, hook race and bobbin holder.
Also use a soft, dry cloth.
marks and
position the bobbin holder so the
notch fits next to the stopper in the
hook race.
Oiling the Machine
SECTION 5. CARE FOR THE MACHINE
Open face cover plate and oil two points as shown below at least once a year. One
or two drops ol oil is sufficient.
Remove excess oil, otherwise it may stain fabrics.
:IWf
in case machine is not used tor an
extended time, oil it before sewing.
Use good quality sewing machine oil.
No other oiling is required
Above points are only area which
require oiling on this machine.
65