Filter
Top Products
SECTION 2. PREPARE THE MACHINE FOR SEWING
Prepare the Bobbin
• To Remove the Bobbin from the Machine
(_ Remove the cover plate by (_ Take out the bobbin,
sliding the hook cover plate
release button the right.
o Horizontal Spool Pin
Ordinary Spool
.-.,,
Small Spool
Tilt up spool pin. Place the spool of thread
on spool pin with the thread coming off the
spool as shown.
Attach the large spool holder pressing it
firmly against the thread spool.
o The small spool holder is used with
narrow or small thread spools.
e
Additional Spool Pin
The additional spool pin is used to wind extra
bobbins without unthreadhg the machine.
To use, insert the additional spool pin in the
hole. Place the and the spioot on the pin.
16