Filter
Top Products
SECTION 2. PREPARE THE MACHINE FOR SEWING
Know What the Presser Feet Will Do (Continued)
g Change the Presser Foot (Continued) • Presser Foot Types
Zigzag Foot
f
Straight Foot
To Snap On
,- .._
Groove _n_
_ ..... J
To Snap On the Presser Foot:
1. Place the presser loot so the
horizontal pin on the loot lies just
under the groove of the toot holder.
2. Lower the presser toot holder to
lock the presser foot in place.
NOTE:
If you do not hear the presser
toot snap in place, press
down on the presser toot
holder firmly until you hear
the snap.
t2
A: Zigzag toot
Use this foot lor both straight and zigzag
stitching.
Uses: Zigzag stitching (see page 3_,
Bar tacking (see page 3_,
Button sewing (see page 4_,
Overcasting stitch (see page 4_,
Blind hemming (see page 4_2.),
Lace work (se page 4_,
Three-step zigzag (see page 4__,
Box stitching {see page 4__,
Two-point shell stitching
(see page 4_.6_),
Fagoting (see page 46),
Two-point box stitch (see page 4_Z),
Overedging stitch (see page 4_Z),
Rick-rack stretch (see page __),
Overcast stretch (see page 50_,
Smoking (see page 5_.03,
Elastic stretch (see page 5_.!_),
Stretch patching (see page 5_,
Herring bone stretch (see page 53t,
Decorative stretch patterns
(see page _._.),
Twin needle stretching (see page 61_.
H: Straight toot
Use this exclusively for straight stitching
using center needle position only.
Uses: Straight stitching (see page 3_!),
Topstitching (see page 3_,
Straight stretch (see page 4__.