Filter
Top Products
Setting the day
(Example) To set to Wednesday (We)
STEP 1 Adjust the day indicator by pressing the DAY button while keeping the SET button pressed.
With each press of the DAY button while keeping the SET button pressed, the blinking day indicator
( ) moves from Su to Sa.
When the indicator reaches the day to set, release the DAY button. By releasing the SET button, the
day indicator is fixed and stops blinking.
• Pressing only the DAY button doesn’t change the day indicator.
• While the day indicator is blinking, if you have not pressed the DAY button, HH button, or MM
button within 30 seconds, the indicator resumes the indication not adjusted (ordinary indicator
mode). To set the day again, follow above steps from the beginning.
NOTE
4. How to set the day
OI-432-03 - 7EG
3 - 7
3
3 TM-SH80UG 5/2/01 3:21 PM Page 7