Filter
Top Products
Adjusting the Airflow Direction (continued)
■ Wall mounted type (K)
A. Vertical directions (automatic)
Confirm that the remote control unit has been turned on. Press the FLAP
button to start the flap moving up and down. If you want to stop the
flap movement and to direct the air in the desired direction, press the
FLAP button again. In the cool mode, don’t direct the flap down more
than 30°, otherwise, condensation may drip on to the floor. Zone “A” is
the recommended flap position for cooling.
Do not move the flap with your hands.
B. Horizontal directions (manual)
The horizontal airflow can be adjusted manually by moving the vertical
vanes to the left or right.
■ Concealed duct type (U)
This air conditioner is not equipped with air outlet parts. These must be
obtained locally. Please refer to the manual of the locally adopted air
outlet parts.
Left
Vertical
vanes
Right
Air outlet
grille
Flap
Down
Up
OI-432-01 - 11EG
1 - 11
Indoor unit
Zone
“A”
for
cooling
Zone “B”
for heating
30˚
60˚
1
1 RCS-SH80U 5/2/01 1:38 PM Page 11