Filter
Top Products
English _ 5
PRODUCT INTRODUCTION
FEATURES
This is a state-of-the-art single door access controller device that provides a high level security system in an
affordable price, meeting the needs in the security industry. With its user-friendly interface, this product enables user
manipulation easy and simple for whatever you want to perform in a high level of stability.
With its user-friendly interface, it can register cards between 10,000 and 50,000, within which you can change,
delete, and add them. The built-in event memory can save up to 50,000 instances of entires and alerts according to
the number of registered cards. (However, the sum of the registered card count and the event count can not
exceed 60,000.) And it also supports a separate event storage system for an input device that detects the most
urgent events such as fi re sensor and emergent input key preceding over other events from a remote site
You can connect a wide range of readers via the two reader ports, and operate the product in RF Card and RF
Card + PW modes. 5 independent input ports can be used to connect to various devices such as Exit Buttons,
Door Contact Sensors, PIR Sensors, and Window Breakage Sensors to reinforce security; this product is designed
to detect any of these sensors cut off or short-circuited.
You can establish the independent or network connection via RS-232 or RS-422 communications. SSA-P102T is
equipped with a built-in TCP/IP module, which enables you to establish LAN communications. All settings including
card registration information, I/O settings, Real Time Clock, Time Schedules and all Event Transaction Reports can
be downloaded /uploaded from/to the host computer with software supporting a variety of reporting formats.
Installed and managed inside the security zone for preventing the risk of damage, this product can implement a high
level security access control system with multiple control options, best fi t for access control and time & attendance
management.
Standalone Operation
As it is equipped with two card readers, you can use this product to control the access on a single door. This
controller determines to allow access by reading data from the card reader, and controls the open/close of the
door relay and enables you to change other output settings. Upon receipt of an incoming external input signal
(sensor or Exit button), it launches an output device such as the relay. This controller has an independent
control system, assuring a normal operation regardless of problems on any other systems and, not affecting
them in the reverse situation.
Data Maintenance
In the event of power failure, the controller retains all card information (user data) and the access/alert history (event
data) until it is damaged on the memory.
Anti-Pass Back
A door has two card readers installed: one for the entrance, and the other for the exit, so anyone who enters should
recognize his/her card on the reader at the entrance time before he can exit normally. If a person does not go under
the card recognition process and just follows another person’s way inside the door, the person is not allowed to exit
when he/she recognizes the access card on exit card reader, and the anti-pass-back error (APB error) occurs
which will be saved into the internal memory. And you can confi gure to output a signal through a specifi c pin when
such an error occurs.
(Make your setting in the Application program (controlled access, time and attendance management, etc) – I/O
Setup – APB Error)
Computer-based Management
All records of authorized or unauthorized accesses and any external signal will be saved in the internal memory. You
can download such data onto your computer according to the specifi ed communications protocol. With the
downloaded data, you can store, process, create a report based on your query (access and alert details, etc) on the
central computer.
Input Port Format Setup
It is equipped with 5 built-in input ports, 2 relay output ports, and 2 TTL output ports. You can use the input ports
to receive signals from the Exit button and the fi re sensor, and utilize this product to meet various situations such as
attaching the door lock to any of the two relays. You can also set the output time for these output ports.
product introduction