Filter
Top Products
If you turn the Client monitor off while booting, it may damage the product.
Local Device (USB) compatibility
HID(Human Interface Devices)
: Keyboard, Mouse
MSC(Mass Storage Class)
: Devices using the SCSI(Small Computer System Interface) command set
: FAT(File Allocation Table) System
Exception
Some manufacturers have wrongly specified their device as USB standard compatible.
Our product has exception handling procedures.
But Some devices are unlikely to work properly.
Some manufacturers have wrongly specified their device as SCSI compatible.
Such devices are unlikely to work properly.
It is recommended that USB devices are purchased after they are tested and confirmed to be
compatible.
PowerSaver (When used as a normal monitor)
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor to low-power mode when it has not been used for a certain amount of time.
The monitor automatically returns to normal operation when you press a key on the keyboard. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in
your computer. Use the software utility installed on your computer to set up this feature.
State
Normal Operation
Power saving mode
Power off
(Power button)
Power Indicator Green Green, Blinking Off
Power Consumption Less than 45 W
Less than 2 W
(Off-mode)
Less than 2 W
PowerSaver (When used as a Client monitor)
State
Normal Operation
Power saving mode
Power off
(Power button)
Power Indicator Green Green, Blinking Off
Power Consumption Less than 35 W
Less than 2 W
(Off-mode)
Less than 2 W
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.