Installation & Servicing Instructions Rinnai E-Series
60
Visual inspection of the ame
The burner must ame evenly over the entire surface when operating correctly. The
ame must burn with a clear, blue, stable ame.
Check the ame through the inspection glass in the ignition probe (g. 33).
The ame pattern should be as shown in the gures below.
SATISFACTORY
Ignition probe
blue ame
UNSATISFACTORY
Ignition probe
yellow ame
Further checks:
- Inspect the pressure relief valve
- Clean the water lter in the return pipe
- Check the pH of the water or glycol/water mixture.
Verify proper operation after servicing.
13.4 Warranty
For warranty conditions refer to the warranty card supplied with the boiler.
Inspection glass figure 33