Filter
Top Products
18
FPI U31-2 Gas Fireplace Insert
11) Mount the cast faceplate panels onto the insert body, sliding the
side fi ller brackets into the space between the glass and the fi rebox.
Secure using the 4 remaining black screws, 2 per side.
12) Install the glass trim by inserting the side hooks on the glass trim into
the 4 slots between the faceplate and the glass. Push the glass trim
down fi rmly with both hands to lock into place.
Slide side fi ller bracket
into gap between
glass and fi re box.
Side Hook
Slots
HAMPTON CAST FACEPLATE
GRILL INSTALLATION
INSTALLATION
Note: The top louver should be placed with
the curved cut-out facing up.
13) To put on the Hampton logo, peel the sticker from the back of the
logo and place it centered on the bottom left hand corner of the
faceplate.
Hampton Logo
Left Hand
Side Faceplate
Before the grills are installed, a grill stop bracket needs to be put in
place.
1) The U31 grill stop bracket is installed in the bottom left corner just
under the fi rebox with the screw supplied as shown below.
U31 Grill
Stop
Bracket
2) Place top grill into brackets located inside top of fi rebox as shown.
Bracket inside
top of fi rebox.
Bracket
Top Grill
3) The bottom louver, shown in the diagram below, has 2 hinges that
are attached to the lip on bottom of the unit. Secure using 2 screws
per hinge.