Filter
Top Products
Page 5
Thank you for selecting the Raypak B6000 Boiler Management System (BMS). It is our sincere hope that
you will enjoy its power, ease of use and energy saving features.
GETTING STARTED
To learn about the B6000 BMS, simply install it and start using it. The following steps will outline the
things you will need for installation and to prepare it for use.
FOREWORD
The B6000 Boiler Management System is comprised of a Boiler Monitor for each
boiler, one System Control for each system, an Outdoor Air Temperature Sensor and
a Water Temperature Sensor. The system is a microprocessor-based energy manage-
ment hot water control system that controls single or multiple boiler installations used for
hydronic heating and/or domestic hot water supply.
The B6000 BMS is designed to provide the ultimate in personal comfort, efficiency and
operation. The system requires minimal attention after initial setup. The system control to
boiler can be separated by up to 2000 feet. It is capable of being monitored from a remote
location, with an optional modem package and a Personal Computer (PC) equipped with
a modem. The Raypak Boiler Management System minimizes boiler operator attendance
and increases system reliability and cost effectiveness.
The System Control Module has
• A screen that displays the different operating characteristics of the system.
• A green light, to the left of the screen, that indicates normal system operating conditions.
• A red light, to the right of the screen, that flashes when a fault occurs.
• An alarm buzzer with a silencing switch. If the buzzer is silenced the red light will continue
to flash until the diagnosed fault is corrected.
• Buttons which are used to monitor and program the selectable system features.
• On board relays designed to control primary system pumps, combustion vent louvers
and/or other boiler accessories.