Filter
Top Products
Microsoft VPN
77
VPN Configuration
This section covers the configuration required on VRT-311 / VRT-311S when using Manual
Key Exchange (Manual Policies) or IKE (Automatic Policies).
Details of using Certificates are covered in a later section.
VPN Policies Screen
To view this screen, select VPN Policies from the VPN menu. This screen lists all existing
VPN policies. If no policies exist, the list will be empty.
Figure50: VPN Policies Screen
Note that the order of policies is important if you have more than one policy for a particular site.
In that case, the first matching policy (for the traffic under consideration) will be used.
Data - VPN Policies Screen
VPN List
Policy Name
The name of the policy. When creating a policy, you should select a
suitable name.
Enable
This indicates whether or not the policy is currently enabled. Use the
"Enable/Disable" button to toggle the state of the selected policy.
Remote VPN
Endpoint
The IP address of the remote VPN endpoint (Gateway or client).
Key Type
This will indicate "Manual" (manual key exchange) or "IKE" (Internet
Key Exchange)
Operations
Add
To add a new policy, click the "Add" button. See the following section
for details.
Edit
To Edit or modify an existing policy, select it and click the "Edit" button.