Filter
Top Products
8
Chapter 2
Installation
This Chapter covers the physical installation of VRT-311 / VRT-311S.
Requirements
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and a Broadband modem
(usually, DSL or Cable modem).
Procedure
Figure 6: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install VRT-311 / VRT-311S.
Ensure VRT-311 / VRT-311S and the DSL/Cable modem are powered OFF.
2. Connect LAN Cables
• Use standard LAN cables to connect PCs to the Switching Hub ports on VRT-311 / VRT-
311S. Both 10BaseT and 100BaseT connections can be used simultaneously.
• If required, you can connect any LAN port to another Hub. Any LAN port on VRT-311 /
VRT-311S will automatically function as an "Uplink" port when required. Just connect any
LAN port to a normal port on the other hub, using a standard LAN cable.
2