Filter
Top Products
Broadband VPN Router User’s Manual
104
Windows 2000 Server Configuration
Configuration is the same as for Example 2: Windows 2000/XP Client to except for specifying
the Source and Destination addresses for the "Filter Properties". Instead, for both IP Filters, the
Filter Properties- Addressing should be completed as follows.
Figure87: Windows 2000 Server - Addressing
• The Source Address should be set to "A specific IP Subnet", and the IP address and
Subnet mask set to the address range used on VRT-311 / VRT-311S 's LAN.
• The Destination Address should be set to "A specific IP Subnet", and the IP address and
Subnet mask set to the address range used on the Windows 2000 LAN.