Filter
Top Products
VRT-311 User Guide
6
Rear Panel
Figure 4: VRT-311 Rear Panel
Figure 5: VRT-311S Rear Panel
Reset Button
This button has two (2) functions:
• Reboot. When pressed and released, VRT-311 / VRT-311S will
reboot (restart).
• Clear All Data. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. Power Off.
2. Hold the Reset Button down while you Power On.
3. Keep holding the Reset Button for a few seconds, until the RED
LED has flashed TWICE.
4. Release the Reset Button. VRT-311 / VRT-311S is now using
the factory default values.
WAN port
(10/100BaseT)
Connect the DSL or Cable Modem here. If your modem came with a
cable, use the supplied cable. Otherwise, use a standard LAN cable.
DMZ port
PCs or devices connected to the DMZ port are isolated from the
LAN.
If you have a server you wish to make available to the public, you can
connect it here. To use multiple servers, use a standard LAN cable to
connect the DMZ port to a normal port on another hub, and connect
your servers to the hub.
10/100BaseT
LAN connections
Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.
Note:
Any LAN port on VRT-311 / VRT-311S will automatically function
as an "Uplink" port when required. Just connect any port to a normal
port on the other hub, using a standard LAN cable.
Power port
Connect the supplied power adapter here.