Filter
Top Products
32
Maschinenantrieb
2.02 With drive system MD-4-58-220-CE
● Press and hold button and switch on machine
● Parameter 176 is displayed.
● Call up parameter 181.
● Call up input level.
● Sew a stitch with the pedal function.
● Turn the handwheel in rotational direction until the needle point (approaching from above)
is on the upper edge of the needle plate.
● Confi rm entry.
● Call up parameter 192.
Call up input level.
Press button D+ to turn function “off”.
Press button “S” to exit input.
2.03 Reseting the drive system MD-4-58-220-CE
● Press and hold buttons “A+” and “B+” and switch machine On.
● The control unit will carry out an automatic reset.
● Switch machine off.
● Check home position as described in Chapter 2.02.
A
D
AB
S
AB
S
S
B
A