Filter
Top Products
Adjustment
13
1.06.07 Needle in stitch hole (in PFAFF 583)
● Loosen screws 1, 2 and 3.
● Position needle bar frame 4 both lengthwise and crosswise of the sewing direction
according to the requirement and tighten screw 2 just lightly and screw 3 fi rmly.
● Turn screw 1 to move the guide pin behind this screw towards the eye of the needle bar
frame and tighten it.
● Turn the handwheel a few turns to ensure that the needle bar is not under stress in the
needle bar frame and tighten screw 2.
Requirement
The needle must penetrate the needle hole right in the center.
Fig. 1 - 07
2
3
4
1