Adjustment
14
1.06.08 Bottom transporter sliding movement
Requirement
With the longest stitch length set and
the needle bar at 1.5 mm before b.d.c. (cylindrical pin in hole "7"; for PFAFF 581)
the needle bar at 0.6 mm past t.d.c. (cylindrical pin in hole "1"; for PFAFF 583)
the feed dog should not move when the reverse-feed control is moved up and down.
● Turn feed driving eccentric 1 (screws 2) according to the requirement.
Fig. 1 - 08
1
2