Filter
Top Products
Adjustment
12
1.06.06 Needle in stitch hole (in PFAFF 581)
Requirement
Bei Stichlängen-Einstellung "0" und in Nadelstangenposition 1,5 vor u.T. (Absteckbohrung "7")
soll
1. zwischen Nadelmitte und der Gußkante des Stichplattenausschnittes ein Abstand von
31 mm bestehen,
2. The needle should be at the centre of the stitch hole when diagonal to the sewing direction.
● Loosen screws 1 and 2.
● Move needle bar frame 3 according to the rule and tighten screw 1.
● Turn the handwheel a few turns to ensure that the needle bar is not under stress in the
needle bar frame and tighten screw 2.
5
1
4
6
3
7
Fig. 1 - 06
2
3
1
31 mm