Filter
Top Products
Adjustment
11
1.06.05 Bottom transporter height
Requirement
With the stitch length set at "0" and the needle bar at a position
1.5 mm before b.d.c (cylindrical pin in hole "7", for PFAFF 581) and 0.6 past t.d.c. (cylindri-
cal pin in hole "1"; for PFAFF 583)
1. the feed dog must be positioned in the middle of the needle plate slots when looked
atfrom the side as well as in feeding direction.
2. the feed dog must be at its top point of reversal and must contact the gauge through-
out its entire length.
● Move feed bar 1 (screw 2) according to requirement 1.
● Turn eccentric 3 (screw 4) and eccentric 5 (screw 6) according to requirement 2.
1
1
2
5
3
4
6
Fig. 1 - 05
=
=
61-111 642-19