Filter
Top Products
4
Technical Specifications
M1200 High Pressure Extractor
Height: 38”
Length: 28”
Width: 19-1/2”
Weight: 141 lbs.
Solution Tank Capacity: 12 gallon
Recovery Tank Capacity: 12 gallon
Solution Pump: Pump-Tec #356 pump with 1-1/2 HP Motor
0-1200 psi – 2.2 gpm
Vacuum Motors: Two AMETEK Lamb 5.7” diameter – tangential discharge
One two stage & One three stage – Mounted in series
Pump-out Pump: Little Giant 120VAC 8-20 gpm
Maximum psi 11.4 – Maximum pumping height 26 ft.
Power Draw: Cord #1 – 17.22amp wide open / 11.54amp full load
Cord #2 – 16.25Amp max total (11.25 Pump /5.00 Waste Pump)
Standard Equipment
M1200 High Pressure Extractor
Vacuum Hose: 25’ X 1-1/2” with 1-1/2” cuff & 2” cuff
4’ x 1-1/2” with 2” cuffs
Hydro-Filter Inline Filter - AC11
HP Solution Hose: 25’ x 1/4” with 1/4” male / female quick connects
Pump Priming Hose: 12” x 1/4” with 1/4” male quick connect
Auto Fill System with chemical draw:
Metering Tip Kit: 14 different tips for changing chemical dilution rate
Water Supply Hose: 50’ x 3/8” with 1/4” female quick connect &
female garden hose fitting
Auto Pump-out System:
Pump-out Hose: 50’ x 3/4” with male & female garden hose fittings
Power Cords: 2 – 50’ x 12gauge with male & female plug ends