Filter
Top Products
MAYCO LS600 PUMP — OPERATION AND PARTS MANUAL — REV. #4 (9/15/11) — PAGE 83
APPENDIX — RECOMMENDED SHOTCRETE SYSTEM
GENERAL RECOMMENDATIONS
■
If the site will permit, use steel pipe from the pump to
the pool perimeter. It will reduce line pressures which
is highly recommended.
■
The vibrator on the reducer by the pool improves
pumpability.
■
Turn both air vibrators off whenever the pump is stopped
to prevent separation of mix.
■
The air vibrators are low consumption (4.2 scfm).
■
Leave the air on at the nozzle when the pump is stopped
to prevent clogging of air the hoses in the air insert.
■
Use item #11 (steel elbow) at the edge of the pool to
prevent collapse of the rubber hose, which can cause
blockage.
RECOMMENDED SHOTCRETE SYSTEM
NO. PART NO. PART NAME QTY. REMARKS
1 EM28906 COUPLING, 5” H-D “CF”
2 EM25837 ELBOW, 5"x4”x90°
3 EM28905 COUPLING, 4” H-D w/GASKET & PIN
4 EM402552 REDUCER, 4”x2.5”x53” H-D ENDS
5 EM28061 PIPE, 2.5”x120w x 10’ H-D
6 EM289035 COUPLING, 2.5” H-D w/GASKET & PIN
7 EM28001DD REDUCER, 2.5”x2”x36” H-D
8 EM23815D REDUCER, 2.5”x2” w/AIR VIBRATOR
9 EM28902 COUPLING, 2” H-D w/GASKET & PIN
10 EM23101 AIR VIBRATOR ASSY.
11 EM28131D 2"x2" ELBOW 90
º
12 EM24841 HOSE, 2”x25’ H-D w/ENDS
13 EM23808D NOZZLE ASSEMBLY, 2” H-D
14 EM23806 NOZZLE TIP, RUBBER 1-3/8”
15 EM23807 NOZZLE TIP, RUBBER 1.25”