Filter
Top Products
PAGE 124 — MAYCO LS600 PUMP — OPERATION AND PARTS MANUAL — REV. #4 (9/15/11)
LS600 PUMP — LUBRICATION PANEL
POSITION LOCATION LENGTH OF LINES
A ................................................. CLEVIS GREASE POINT ................................................ 34 in. (1.1 m)
B ................................................. SWING AXLE BUSHING GREASE POINT ...................... 26 in. (.85 m)
C................................................. PIVOT BRACKET GREASE POINT ................................. 41 in. (1.5 m)
Grease daily, two or three hots of #2
multipurpose automotive grease. Over
greasing any bearing will not damage
the machine. ALWAYS grease
before
and after
pump operation.