Filter
Top Products
MOXA AirWorks AWK-1200-AP User’s Manual Getting Started
2-2
First Time Installation and Configuration
After unpacking the system, make sure the following items are present and in good condition.
Refer to pictures below to see what each item looks like.
1. AWK-1200-AP
2. Power cord
3. 48 VDC, 0.38A Inline Power Injector (PoE)
4. 30 m RJ45 CAT-5 Ethernet cable
5. 1.8 m RJ45 CAT-5 cross-over cable
6. 3 m grounding wire
7. Document and Software CD
8. Wall/mast mounting kit
9. Screws
10. Two 5 dBi Omni-type antennas (N-type connector)
1. AWK-1200-AP 2. Power cord 3. PSE Injector 4. 30 m cable
5. 1.8 m cable 6. Grounding wire 7. CD 8. Wall mount
9. Screws 10. Antenna
Locating the Data Input and PoE Ports
After unpacking the system, locate the following ports on the AWK-1200-AP unit. The numbers
next to each item refer to the pictures in Figure 2-1.
Interface on the AWK-1200-AP Unit
y Ethernet Port 1: for connecting the 30 m RJ45 CAT-5 Ethernet cable.
Interface on the Inline Power Injector
y Data Input Port 2: for connecting the cross-over Ethernet Cable to a PC or straight-through
Ethernet cable to a Hub, Switch, or Router.
y DC Input Port 3: power adaptor; 48V, 0.38A DC input.
y Power & Data Output Port 4: for connecting the 30 m RJ45 CAT-5 Ethernet cable.