Filter
Top Products
MOXA AirWorks AWK-1200-AP User’s Manual Getting Started
2-5
Basic Configuration
Basic Configuration Steps
This section describes a basic 2-step configuration procedure to set up the AWK-1200-AP.
Step 1:
Modify the factory-default parameters on the web page “/BASIC/LAN/”, click Save Settings to
save the changes, and then click Continue.
Step 2:
Modify the factory-default parameters on the web page “/BASIC/Wireless/”, click Save Settings
to save the changes, and then click Reboot the Device to take activate the configuration changes.
Logging into the Web Interface
Users can access and configure the AWK-1200-AP through a web browser interface.
Web Configuration
Before configuring the AWK-1200-AP, you need to know the IP Address assigned to the unit. The
factory default IP Address is 192.168.127.253. To establish a connection, type
http://192.168.127.253 in the browser’s address field.
Web Access Procedures
Once you identify the IP Address assigned to the AWK-1200-AP, use the web browser to
configure the AWK-1200-AP through the browser Interface. The following procedure explains
how to configure each item.
Step 1: Open your browser and enter the IP address.
Step 2: Press <ENTER>. The AWK-1200-AP Login screen should appear as shown in Figure
2-5.
Figure 2-5