Filter
Top Products
MOXA AirWorks AWK-1200-AP User’s Manual Introduction
1-2
Overview
The AWK-1200 Access Point/Bridge and AP Client is ideal for applications that are hard to wire,
too expensive to wire, or use mobile equipment that connects to a TCP/IP network. The
AWK-1200 series is rated to operate at temperatures ranging from -20 to 70°C, and its
weatherproof design allows you to set up a WLAN, or extend existing wired networks to outdoor
locations. In addition, you do not need to worry about setting up a power supply for outdoor
applications, since the AWK-1200’s PoE (Power over Ethernet) design makes it easy to deploy.
Package Checklist
The product package contains the following items.
y AWK-1200-AP
y Power cord
y 48 VDC, 0.38A Inline Power Injector (PoE)
y 30 m RJ45 CAT-5 Ethernet cable
y 1.8 m RJ45 CAT-5 cross-over cable
y 3 m grounding wire
y Document and Software CD
y Wall/mast mounting kit
y Band clamp
y Two 5dBi Omni-type antennas (N-type connector)
Product Features
y Outdoor enclosure in compliance with versatile industrial IP (Ingress Protection) level covering
IP68
y RF transmit power: 802.11b mode @ 11 Mbps data rate
y RF transmit power: 802.11g mode @ 54 Mbps data rate
y Supports 48 VDC 0.38A Power-over-Ethernet (PoE)
y MIB-I support
y MAC address based access control
System Requirements
Installing the AWK-1200-AP requires the following:
y Windows-based PC/AT compatible computer (PC system requirements: better than PIII 800 or
other 100% compatible equipment; OS: Windows 2000/XP), or Ethernet data device that has an
RJ45 Ethernet port to run the configuration program or a TCP/IP connection to the Ethernet
network.
y 10/100 Base-T Ethernet RJ45 Ethernet cable for connecting to an Ethernet network.
y AC power outlet (100 to 240V, 50 to 60 Hz) to supply power.