Filter
Top Products
36
RYDIS H67 Pro
Threshold Option
Ě
For safety reasons, the RYDIS H67 Pro was designed not to climb over a threshold higher than 0.4 inch (1 cm).
Ě
For less than a 0.4inch threshold height, the user is able to choose threshold climbing over ON/OFF option by
the remote control. We recommend not to climb over while in Mop Cleaning mode and Hybrid Cleaning mode
due to the Disposable Mop. We also recommend that you select the Threshold Option (climb over) ON while in
Vacuum Cleaning mode. Factory default is set to not climb over for Hybrid, Vacuum and Mop Cleaning mode.
1
Þ
Turn the system power switch on.
4
Þ
Press the Threshold Option button on the remote
control. Threshold Option indicator is now turned on.
3
Þ
Select any one of Hybrid / Vacuum / Intensive / Shadow / Manual Cleaning and press the Start/Stop button.
To learn how to select these options, you may refer to the relevant sections on the User Manual.
or
2
Þ
Turn the main power button on. The LED
light will blink top to bottom. It will show
its ready to operate after 2 seconds.
5
Þ
The RYDIS H67 Pro will now travel over
thresholds with height of 0.4 inch (1 cm)
or lower.
0.4 inch
(1 cm)
0.4 inch
(1 cm)
or or oror