Filter
Top Products
33
Product Operation
Manual Cleaning
You can control the RYDIS H67 Pro directly using the remote control to cover anywhere you want to be cleaned.
3
Þ
Press the Manual button on the remote control.
Air suction will start in its current place.
If you press the Manual button again, air suction will be stopped.
4
Þ
By pressing direction keys on the remote control, you can move
the RYDIS H67 Pro where you want it to go.
Ě
During charging, you can’t move the RYDIS H67 Pro manually.
Ě
You can use this mode when you want to move the RYDIS H67 Pro without air suction.
or
1
Þ
Turn the system power switch on.
2
Þ
Turn the main power button on.
The LED light will blink top to bottom.
It will show its ready to operate after
2 seconds.