Filter
Top Products
7
Before Use
Do not press strongly or impact the bumper.
●
This may cause damage to the bumper sensors and malfunction.
Do not use the RYDIS H65 in a place where the temperature is too low or too high (lower than 23F (-5°C) and higher
than 120F (49°C)).
●
This may cause damage to the product.
Do not use the RYDIS H65 when the dust bin is lled up.
●
This may reduce the suction power.
Never use the RYDIS H65 without the lters.
●
Doing so may cause a malfunction of the RYDIS H65.
Do not use the RYDIS H65 in a place where the oor or wall is made of glass or mirrors.
●
The RYDIS H65 detect obstacles by using an IR sensor, so it may not detect glass and mirrors as obstacle.
Do not use the RYDIS H65 on a ooded oor, on stairs, on a table or shelf, in a warehouse, in a commercial building or
outdoors.
If you have dropped or given an impact to the RYDIS H65, contact our service center.
Electrical instructions
Please use the power source and socket with the correct Voltage and Ampere.
●
If you use a power source or socket that does not t the power specications, there is the risk of re, electrical shock,
and damage to the RYDIS H65.
Make sure the power cord is not bent or crushed by heavy objects.
●
A damaged power cord may cause a re or electrical shock.
●
To repair or replace a damaged power cord, contact our qualied service center to ensure your safety.
When plugging in or removing the power plug, always plug it in or remove it by holding the plug, not the cable.
●
Stress on the cable will damage the power cord, which may cause a re or electrical shock.