Filter
Top Products
30
RYDIS H65
Cleaning the Dust Inlet
1
To reinstall the dust inlet cover, insert the 2 tips to the
matching holes on RYDIS H65.
5
3
2
Clean the removed main brush with
the cleaning brush.
Remove the main brush.
Remove the dust inlet cover.
4
First, insert the main brush’s
hexagonal head to the matching
hexagonal socket on the RYDIS
H65.
Second, install the main
brush by inserting the
bearing to the housing.
Make sure to orient bearing
so that the smaller tip is
facing inward.