Filter
Top Products
17
Installing
Charging
If you have prepared the charging station, main body, and remote control, you must then charge the RYDIS H65 to use
it. To charge the RYDIS H65, follow these steps:
1
●
Turn the system power switch on.
2
●
Hold the RYDIS H65 with both hands and put it on the charger.
-
Match the terminals of the RYDIS H65 with the terminals of the charging
station.
-
Put the RYDIS H65 in the front center of the charging station and push the
RYDIS H65 toward the charging station slowly until the status indicator
turns solid red.
-
Blue lamp: charging station power on indicator
Red lamp: H65 charging indicator
3
●
Use the RYDIS H65 after charging.
-
It takes up to 1 hour to charge the battery fully.
Battery Status
Charging Blinking every second
Indicator
Charging completed Solid lamp with 3 bars without blinking
Low battery Blinking 4 times every second