Mitsubishi Electronics PCA-A.KA Air Conditioner User Manual


 
8
7. Press the appropriate Set Temperature button
3
to set the desired
temperature (at
7
).
* Each press changes the setting, in the following sequence: No
display (no setting) 75 77 ... 84 86 54 ...
73
No display.
(Available range: The range for the setting is 12 °C, 54 °F to 30 °C,
86 °F. The actual range over which the temperature can be con-
trolled, however, will vary according to the type of the connected
unit.)
8. After making the appropriate settings at Steps 5, 6 and 7, press the
Filter button
4
to lock in the values.
To clear the currently set values for the selected operation, press
and quickly release the Check (Clear) button
0
once.
* The displayed time setting will change to “—:—”, and the On/Off
and temperature settings will all disappear.
(To clear all weekly timer settings at once, hold down the Check
(Clear) button
0
for 2 seconds or more. The display will begin
blinking, indicating that all settings have been cleared.)
Note:
Your new entries will be cancelled if you press the Mode (Return) but-
ton
2
before pressing the Filter button
4
.
If you have set 2 or more different operations for exactly the same time,
only the operation with the highest Operation No. will be carried out.
9. Repeat Steps 3 to 8 as necessary to ll as many of the available
cells as you wish.
10. Press the mode (Return) button
2
to return to the standard control
screen and complete the setting procedure.
11. To activate the timer, press the Timer On/Off button
9
, so that the
“Timer Off” indication disappears from the screen. Be sure that the
“Timer Off” indication is no longer displayed.
* If there are no timer settings, the “Timer Off” indication will blink
on the screen.
<How to View the Weekly Timer Settings>
1.
Be sure that the weekly timer indicator is visible on the screen (at
1
).
2. Press the Timer Menu button
2
so that “Monitor” is indicated on
the screen (at
8
).
3. Press the Timer On/Off (Set Day) button
9
as necessary to select
the day you wish to view.
4. Press the or Operation button (
7
or
8
) as necessary to
change the timer operation shown on the display (at
9
).
* Each press will advance to the next timer operation, in order of
time setting.
5. To close the monitor and return to the standard control screen,
press the Mode (Return) button
2
.
<To Turn Off the Weekly Timer>
Press the Timer On/Off button
9
so that “Timer Off” appears at .
6.1.2. Simple Timer
You can set the simple timer in any of three ways.
Start time only:
The air conditioner starts when the set time has elapsed.
• Stop time only:
The air conditioner stops when the set time has elapsed.
Start & stop times:
The air conditioner starts and stops at the respective elapsed times.
The simple timer (start and stop) can be set only once within a 72-hour
period.
The time setting is made in hour increments.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same
time.
*2. The simple timer will not operate when any of the following conditions is
in effect.
The timer is off; the system is in malfunction state; a test run is in
progress; the remote controller is undergoing self-check or remote con-
troller check; the user is in the process of selecting a function; the user
is in the process of setting the timer; the system is under central control.
(Under these conditions, On/Off operation is prohibited.)
ONHr
AFTER
SIMPLE
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK DAY
MONITOR/SET
CLOCK
ON/OFF
ONHr
AFTER
SIMPLE
Timer Setting
Action (On or Off)
* “— —” is displayed if there is no
setting.
<How to Set the Simple Timer>
1. Be sure that you are at a standard control screen, and that the simple
timer indicator is visible in the display (at
1
).
When something other than the Simple Timer is displayed, set it to
SIMPLE TIMER using the function selection of remote controller (see
8.[4]–3 (3)) timer function setting.
2. Press the Timer Menu button
2
, so that the “Set Up” appears on the
screen (at
2
). (Note that each press of the button toggles the display
between “Set Up” and “Monitor”.)
3. Press the ON/OFF button
1
to display the current ON or OFF simple
timer setting. Press the button once to display the time remaining to
ON, and then again to display the time remaining to OFF. (The ON/
OFF indication appears at
3
).
• “ON” timer:
The air conditioner will start operation when the speci ed number of
hours has elapsed.
• “OFF” timer:
The air conditioner will stop operation when the speci ed number of
hours has elapsed.
4. With “ON” or “OFF” showing at
3
: Press the appropriate Set Time but-
ton
1
as necessary to set the hours to ON (if “ON” is displayed) or the
hours to OFF (if “OFF” is displayed) at
4
.
Available Range: 1 to 72 hours
5. To set both the ON and OFF times, repeat Steps 3 and 4.
* Note that ON and OFF times cannot be set to the same value.
6. To clear the current ON or OFF setting: Display the ON or OFF setting
(see step 3) and then press the Check (Clear) button
0
so that the
time setting clears to “—” at
4
. (If you want to use only an ON setting
or only an OFF setting, be sure that the setting you do not wish to use
is shown as “—”.)
Timer Settings
°F
°F
TIME SUN
WEEKLY
10
°F
°F
TIME SUN
WEEKLY
10
6. Timer
<To Turn On the Weekly Timer>
Press the Timer On/Off button
9
so that the “Timer Off” indication (at )
goes dark.
°F
TIMER
SUN
ON
OFF
WEEKLY